The Week in Soap: 4th March ’18

Or perhaps, this week, the title should be: Yr Wythnos Mewn Sebon: 4ydd o Fawrth, ’18, because this week, on Wednesday 1st March, we celebrated St. David’s Day, or Dydd Gwyl Dewi as we know it.  St David is the patron saint of Wales, and as a good Welsh girl, I felt I really should include a little Welsh language, and some daffodils, in this week’s post 😀

Of course, Welsh Cakes had to be made too. There were many, many more than this, but by the time I thought to take a photo the pile had depleted somewhat:

Teisen Gri (Welsh Cakes)

Teisen Gri (Welsh Cakes)

Other than St David’s Day, the most notable thing this week has been the weather.  There’s been a LOT of weather.  The Beast from the East blew down from Siberia, and, along with Storm Emma, caused chaos and crisis the length and breadth of Britain. We got plenty of snow here in our little corner of Snowdonia, but to be honest weren’t too adversely affected.  In fact, the only inconvenience for me was the fact that delivery lorries couldn’t get through so I ran out of sodium hydroxide, despite having ordered it in plenty of time. Ho hum….

On Monday, I made up a big, four loaf batch of Traeth Craig Du (Black Rock Sands) soap.  This one’s such a doddle to make as I don’t have to worry too much about keeping the batter fluid for the swirls – it’s just a simple three layer soap. Here it is in the mould:

Four loaves of Traeth Craig Du in the mould

Four loaves of Traeth Craig Du in the mould

And freshly cut:

Traeth Craig Du freshly cut

Traeth Craig Du freshly cut

I also made seven dozen bathbombs this week, six large and six small of each fragrance.  They’re not huge sellers, but they’re slowly growing in popularity, and I’ve had some wholesale orders through, so I thought it was time to start building up stock levels again.  I made, clockwise from top left, Bewitched, Lavender, Clarity, Welsh Rose, Oatmeal, Milk & Honey, Sugar Drops and Serenity (in the middle)

Seven varieties of bathbomb

Seven varieties of bathbomb

The only other thing of note that I’ve done this week, other than the usual day to day mundane stuff, is make Hot Process soap. I  finally got round to getting out that slow-cooker that I bought before Christmas to make up a batch of solid shampoo. I was surprisingly happy with the results, especially for a first attempt:

Cut Hot Process Shampoo Bars

Cut Hot Process Shampoo Bars

These bars are half sized, as I’m planning on sending most of them out to friends & family for testing once they’ve cured a while, and I’m looking forward to hearing what people think of them.

I was due to be at a craft fair today (Sunday), but unfortunately it was postponed because of the adverse weather conditions – it’s been rearranged for a couple of weeks time so nothing’s been lost.

Oooh yes, and I finally hit 500 followers on Twitter.  It’s been a long time coming but I’ve been putting a bit more effort into it and it seems to be paying off slowly. Very slowly!

As always, thanks for reading.  I’m going to try to devote some time to my (not imaginary, I promise) website this coming week, but don’t hold me to it!!

Vickx

 

Advertisements

Hot Process – First Attempt

On Monday I decided to try my hand at making Hot Process (HP) soap for the first time.  It’s been on my list of things to do for aaaaages, and I even bought a fancy pants slow cooker / crock pot before Christmas in readiness, but the time was never right.  Recently however I was contacted by Plastic Free Snowdonia, a group who, as the name suggests, are trying to reduce the amount of plastic being used in this area.  They were interested in solid shampoo bars, which I’ve not made for a while, and I decided that this was the perfect opportunity to try out the HP method. My starting point was this tutorial by Sarah of Sas-Oki Soap and while clearly I am in no position to write a HP tutorial, being an absolute beginner, I did take a load of photos and so I thought I’d share the experience with you.

In the past I’ve used Liz Ardlady’s shampoo bar recipe, but used water instead of the apple cider vinegar (ACV), and left out the sodium lactate. I should confess that I’ve never used the original recipe as written, but I’ve always been really happy with the final bars without the ACV, so I decided to use the same recipe for my foray into Hot Process.

I put all the fats into the slow cooker and while they were melting down I made up the lye solution.

Oils & Butters Melting

Oils & Butters Melting

Off I went to do something else, and of course by the time the lye solution had cooled down, the fats were waaaaay to warm, so I popped them out into the snow to cool down 😀

Oils & Butters Cooling

Oils & Butters Cooling

Once everything was cool enough I added the lye to the oils and gave it all a quick stick blend to emulsify:

Lye added and stick-blended to emulsification

Lye added and stick-blended to emulsification

I turned the crockpot onto ‘medium’, covered the top with some cling film before putting the lid on to keep the moisture in (a tip I got from the Modern Soapmaking HP tutorial) and let it do its thing.  Another tip from the Modern Soapmaking tutorial was NO STIRRING.  So all I did was take a photograph every ten minutes or so.

This one was after 10 minutes cooking – the soap is beginning to saponify round the edges.  Apologies for the quality of these photos, there was condensation forming on the cling film over the pot:

After 10 mins cooking

After 10 mins cooking

After 20 mins cooking:

After 20 mins cooking

After 20 mins cooking

The soap continued to cook, and change colour as time went on. This was what it looked like after 40 mins, and it didn’t really change appearance for the next 10 minutes or so. I decided it might be ready.  All tutorials I’ve read have recommended using an infra-red thermometer to check readiness, but I don’t have one, so was winging it…

After 50 mins cooking

After 40 mins cooking

 

So a the 50 minute mark I removed the lid and the cling film, gave it a good whisk, then did the zap test.  For the uninitiated, the zap test is the process whereby you remove a small amount of soap from the pot and touch the tip of your tongue to it. Yep, you LICK potentially caustic soap.  Sounds crazy I know, but it’s a time honoured method of checking whether soap has fully saponified. If it simply tastes, erm, soapy, it’s good to go. If it zaps (and trust me, you’ll know what I mean if it happens to you) it’s not yet ready.  Oh, and please don’t put the licked soap back into the pot!!  😀

Fully cooked soap, whisked

Fully cooked soap, whisked

I then added some grapefruit essential oil,  and whisked that in thoroughly before the soap was spooned (actually, plopped and stuffed) it into the mould… It was very thick, and solidifying very quickly.  I’ve read that adding yoghurt, (or coconut cream/milk for a vegan version) can be added at this point to help fluidity – I’ll be trying that next time.

Solid shampoo freshly plopped into the mould

Solid shampoo freshly plopped into the mould

I scraped the last bits out of the pot and rolled them into little balls – with my bare hands!!!  I know, I know, I wouldn’t normally do it but these balls at least are for my own personal use only.  And the novelty of being able to squidge soap that’s straight out of the pot with my bare hands was irresistible 😀

Shampoo Balls

Shampoo Balls

Two days later the soap has become even more opaque:

Shampoo Bars in the mould after 48 hours

Shampoo Bars in the mould after 48 hours

I unmoulded the bars, and then cut them in half. These bars are going to be sent out as testers as, although I personally love this recipe, I want as many opinions as I can get before I think about selling this solid shampoo.

Unmoulded Shampoo Bars

Unmoulded Shampoo Bars

Cut Shampoo Bars

Cut Shampoo Bars

There seems to be conflicting opinions regarding how long Hot Processed soap should be cured for.  Strictly speaking, it’s safe  to use straight out of the mould, as the process of saponification has completed in the pot. I did use one of my little balls of shampoo on the same day as I made it, and it worked perfectly. However, as with CP soap, the bars were still somewhat soft when they came out of the mould, and I’m definitely going to give them an as-yet-undetermined cure time to dry out and harden up a bit. I’ve weighed one of the bars and I’ll monitor the weight reduction on a regular basis and report back when it’s ready.

I’m surprisingly thrilled with the result. It’s not very pretty. Not pretty at all actually. But it’s quick & easy and the clean up process is an absolute doddle and I’ll definitely be doing it again.  If you have any tips I’d love to hear them – pleeaaaase 🙂

Thanks for reading,

Vickx